Armored USB 3.0 Female/Male over MPO Fiber Optic Cable, support distance up to 1000ft
NOTE: This item includes a pair of USB 3.0 (Female+Male)-MPO ends, 2x MPO adapters/couplers and you selected cable length of MPO-MPO fiber optic cable.
As technology innovation marches forward, new kinds of devices, media formats, and large inexpensive storage are converging. They require significantly more bandwidth to maintain the interactive experience users have coe to expect. In addition, user applications demand a higher performance connection between the PC and these increasingly sophisticated peripherals. Super Speed USB addresses this need by adding an even higher transfer rates to match these new usages and devices. Our USB 3.0 MPO Fiber optic cable provides the speed and bandwidth needed for the best video and/ or audio quality for high definition at lengths up to 1000ft (303 meters); supporting the long distances required in commercial video solutions.
What is MPO Connector?
Multi-fiber push on connectors, or MPOs for short, are fiber connectors comprised of multiple optical fibers. While defined as an array connector having more than 2 fibers, MPO connectors are typically available with 8, 12 or 24 fibers for common data center and LAN applications. Other fiber counts are available such as 32, 48, 60 or even 72 fibers, but these are typically used for specialty super high-density multi-fiber arrays in large scale optical switches.
You may also see the term MTP Connector used interchangeably with MPO Connector. The term MTP is a registered trademark of the MPO connector offered by US Conec. The MTP connector is fully compliant with MPO standards and is described by US Conec as an MPO that has been engineered to very tight tolerances for improved performance. For the purposes of this discussion, we will refer to only MPO connectors since MTPs are considered to be MPO connectors.
Multi-mode OM3 Fiber Optical Cable
Multi-mode fiber cable is typically cost effective for pre-installations and long distance connections in buildings or corporate campuses while single-mode is better suited for longer distance runs. Single-mode fiber can transmit over greater distances but typically requires more expensive equipment. Multi-mode is cost effective for installations where the lengths don't exceed a few hundred meters.
Why choose MPO pure fiber optical cable solutions for your HDMI/DVI/Displayport/USB connections?
Compared with hybrid optical AOC cables, New pure fiber cables have significant advantages as below:
- One multi-fiber OM3 fiber cable with 4x MPO connectors for many different Pigtails MPO cable and pigtails are separate
- You can change and connect with HDMI, DP, USB, DVI. etc up to 20 different Pigtails anytime
- No fixed direction they are bi-directional Pigtails are separate and you can change the "Source" and "Display" anytime
- Easily upgrade to the next generation. If you need USB4 just change the Pigtail Extra long length up to 1000ft using OM3 fiber
- The pure fiber cable can support 4K 60Hz and upgrade to 8K in future
