Quick Assembly Connector (also named “ No-Polish Connector ” , “Pre-polish Connector” or “ Fast Connector ”) is an easy-to-install device.
No tool or jig is required. It is universal for 250um /900um / 2.0mm / 3.0mm / Flat Cable.
It was designed for fast termination with pre-polished connector. Using V groove technology, it requires no epoxy. With transparent body, the connecting result can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building.
FTTH project usable
Insert loss less than 0.3dB
Metal V-shape cavity work well in high and low temperature
Installation less than 1 minute
Reliable and superior optical performance
Maintenance or emergency restoration of fiber networks
|Cable Scope||Ф3.0 mm & Ф2.0 mm Cable|
|2.0x3.0mm drop cable|
|Fiber Diameter||125μm ( 652 & 657 )|
|Operation Time||about 15s（exclude fiber presetting）|
|Insertion Loss||≤ 0.3 dB（1310nm & 1550nm）|
|Return Loss||<= - 50dB|
|Reusable Times||>10 times|
|Tighten Strength of Coating||>10N|
|On-line Tensile Strength Test (20 N)||IL ≤ 0.3dB|
|Mechanical Durabiltiy (500 times mating)||IL≤0.3 dB|
|Drop Test(4m concrete floor, once each direction, three times total)||IL ≤ 0.3dB|